E1 to Ethernet Protocol Converter, Interface Converter
4E1 to 4*Ethernet Converter
GENERAL INFORMATION：
4E1 to 4Ethernet converter (Ethernet over 4E1 converter) provides easy conversion from 1 to 4 E1 channels to 4 x Ethernet ports. Support 1 to 4 E1 channels setting, it can detect the number of E1 chnanel and select available channel, also it's equipped with NMS GUI for remote and local monitoring purposes
PRODUCT CHARACTER:
1). According with IEEE 802.3, support 10Base-T, 100Base-T
2). Support flexible setting of 1 to 4 E1 channels, auto detect the number of E1 channels and time-delay, select available E1 channels and more;
3). Provide 2 loop functions: local E1 loop, remote E1 loop.
4). Ethernet transmission transparent,support AUTO-MDIX, straight and crossover auto-adapt.
5). Can transmit super-long frame of IEEE 802.1Q, support Ethernet exchanger with VLAN function.
7). Support E1 channel hot plug, and auto detect available E1 channels.
8). Support reset remote system from local system.
9). 4 E1 can have 10 ms time-delay, CRC alarm limitation can auto insulate bad-quality transmit channel by configuration, and is single direction insulation. when one direction error rate over limitation, cut only this direction, the other direction not affected.
11). Power supply option: AC96 - 260V, DC-48V.
12). Performs inverse multiplexing to send Ethernet bundled over 4E1, to get speed close to 8 Mbit/s;
13). Remote GUI NMS monitoring software in set
14). Both E1 interfaces - RJ-45 and BNC already on board.
TECHNICAL SPECIFICATION:
E1 interface:
interface standard:according with G.703
Interface Rate:2.048Mbps+-50ppm
Jitter tolerance:according with G.742 and G.823.
transmission capability: 4*E1
clock mode: inter-clock, line-clock
connector: BNC（75Ω）、RJ45（120Ω）
E1 Impedance: 75Ω(unbalance), 120Ω(balance).
10/100 Base-T interface:
Interface Rate: 10/100Mbps
Duplex: half and full duplex self-adapt.
Interface character: match IEEE802.3, IEEE802.1Q(VLAN).
Connector: RJ45, support auto-mdix
MAC address capability: 4096
Working environment:
power supply: AC220V；DC –48V
power consumption: ≤5W
working temperature: 0°C ~ 50°C
storage temperature: -40°C ~ +70°C
humidity: 95 %
Typical Application:
