FE1 to 2V.35 Protocol Converter

Framed E1 to 2V.35 Converter


GENERAL INFORMATION
According to user's requirements, this equipment can multiple 2 V.35 into one E1 with noninterference for transmission. In addition, the rate of two V.35 ports can be configured discretionarily under the precondition that total rate is no higher than the rate of E1.

Main Features:
Convert 2*V.35 into G.703 G.704 E1 Interface
The V.35 interface rate is n*64kbps (n=1~32).
Able for loop-back of V.35 and E1 local and remote terminals.
E1 Interface: provides master, slave and external three optional clocking modes
Provides three optional framing, multiframing, and non-framing modes for E1 signals.
E1 interface impedance can be set at 75Ωor 120Ω.
Power Supply:AC220v and DC-48v, etc.
Hyper terminal and network administration functions reserved

Technical Specification

E1 Port Standard
2M Port: ITU-T G.703 and G.704 compliant
Code Type: HDB3
Code Rate: 2.048Mb/s±50ppm
E1 Interface: Unbalanced: 75Ω/BNC

V.35 Port Standard
Code Rate: n×64kbps(n = 1~32)
Clock :Master/Slave/Source three optional clocking modes
Interface Type: V.35 / DCE
Electrical Characters: ITU-T V.35 proposed standard balance
Terminal standard: ISO2593 compliant

  • Environment:
    Power Input AC, DC
    Power Consumption: ≤5W
    Operating Temperature: -5℃~50℃
    Storage Temperature: -40℃~+70℃
    Relative Humidity: 10%~90% Non-condensing
    No corrosive and solvent gas, no fluty dust and intense magnetic-field interference

    Physical:
    Dimension: 200mm(width) x 43.5mm (height) x 150mm (depth)
    Weight: 0.8kg
    Rack Type: EIA 19" Rack