G64K to Ethernet Protocol Converter, Interface Converter

  G64K to Ethernet Converter

GENERAL INFORMATION：
G64K to Ethernet converter (Ethernet over G64K converter) is a sort of self-learning remote Ethernet bridge of high performance to fulfill the conversion for 10Base-T Ethernet interface and G64K interface. Self-learning remote Ethernet bridge, Small size, low cost and as a bridging application suitable for cost sensitiveness also as a LAN extender. This unit can continuously learn MAC destination address over the connected LAN and determine whether frames can be forwarded or filtered according to MAC destination address of data frames.

Features:
● Provide two kinds of loop test, Local loop and Remote Loop.
● Support Pseudo-Random Code Test, it is covenient for instalation.
● It is easy to operate, all settings can be realized on the Front Panel.

Technical Specification
10BASET interface:
Bit rate: 2048Kbit/s
Standard: IEEE802.3
Interface rate: 10Mbit/s
Interface type: 8feet, RJ45plug

G64K interface:
Rate: 64Kbit/s
Code type: HDB3
Standard: G.703 and G.704
Connector: RJ45, 120Ohm

Workingconditions
Power supply Optional
Power consumption≤5W
Operating temperature -5℃~50℃
Storing temperature -40℃~+70℃
Relative humidity 10%～90% nonecondensing
Nocorrosive and solventGas, no flying dust and intense magnetic-field interference

Typical Application: