4E1 PDH Fiber Optical Multiplexer
4E1+4ETH+RS232 PDH Optical Multiplexer
SPOTLIGHT:
Optimux-4E1+4Eth Optical multiplexer is state-of-art 4 x E1 G.703 + Ethernet 10/100BaseT fiber multiplexer with logical bandwidth control, QoS, and dot1Q VLAN's which allows effective transmission of those protocols over fiber optical cable over distances more than 120 km. Single mode, dual mode and WDM (BiDi) versions
DESCRIPTION:
Optimux-4E1+4Eth series of Multi E1 & Fast Ethernet Optical Terminal is a product combining of a PDH optical transport system and an Ethernet transceiver.
Optimux-4E1+4Eth can provide up to 4 E1 interfaces and 4 Fast Ethernet interface. The Ethernet interface can be operated in 10M/100M, half duplex or full duplex mode by either auto-negotiation or manual setting.
Optimux-4E1+4Eth is a fiber media transport for 4E1 + 4 x 10/100BaseT transmission. The BNC model provides unbalanced 75 Ohm coaxial connections while the RJ-48C model provides balanced 120 Ohm connections over twisted pair wiring.
All media converters are available with either multi-mode or single-mode optical tranceivers and with connectors for SC, or FC. In single mode they are available in up to 120 km versions reach, which will provide the ability to transmit and receive data using only a single optical fiber pair.
4E1+4Eth Optical multiplexer provides an order-wire for which a standard telephone can be used.
4E1+4Eth Optical multiplexer provides a user RS232 transparent data link with a RJ45 connector.
4E1+4Eth Optical multiplexer possesses complete operation monitoring function. Those indicators include Loss of optical signal, LOF, 10-3, 10-6 bit error rate, Loss of each E1 tributary signal and Ethernet status. Since some overhead bytes are taken as monitoring channel, all alarm and status of Remote can be display locally.
4E1+4Eth Optical multiplexer provides RS232 interface for Network Management. Supported by GUI NMS utility, users can observe the status of Local and Remote, as well as other alarm information unable to be displayed by LEDs in the front panel. Also, with NMS software, user can make certain E1 loop back for testing purpose.
4 x 10/100 Ethernet ports support intelligent Layer 2 switch features, such as QoS, dot1Q and port based VLAN's, flow control per port with steps n x 32 Kbit/s and more.
FEATURES:
Provides 4 x E1 G.703 transparent transmission over the fiber;
1+0 or 1+1 optical protection optional;
Provide 4 x 100 Mbit/s Ethernet channels, Ethernet speed can be set for each port on based on any multiples of n x 32 Kbit/s;
Provides one RS232 channel for option;
Provide one hotline channel for option (order wire);
Speed of optical port is 155Mbps, transmission range can reach 25KM, 40KM, 60KM, 80KM or 100km,120KM;
E1 interface code is HDB3; E1 vibration characteristic conforms to ITU-T G.703、G.823 and G.742;
Ethernet port supports full/half duplex, 10M/100M auto-adaptable, throughput is full duplex 100 Mubit/s;
Ethernet port supports dot1Q VLAN setting possibility and port based VLAN's.
Layer2 intelligent switch possibilities for 4 x Ethernet ports
Ethernet packet size supports 1916 byte and 4 Ethernet port could be set seperately, jumbo frames are supported;
Simultaneous 4 E1 & 100 Mbit/s full duplex operation;
LED indicators for alarm function and can monitor remote device status;
Rich DIP switch settings
Supports E1 local and remote loopback for installation
The combination AC220V and DC-48V for redundant options;
Broadcast Storm Protection, Port monitoring.
Current alarm and alarm history database
GUI based RS232 NMS manager for easy and convenient monitoring and management.
Specifications
E1 interface:
Channel capacity: 4 Channels
Bit Rate: 2.048 Mb/s ±50 ppm
Line Code: HDB3
Line Impedance: 120 Ohm / 75 Ohm
Connector: RJ-48 / BNC
Pulse Shape: ITU-T G.703
Jitter Performance: ITU-T G.823
Clock mode: internal-clock, external-clock
Ethernet interface:
Interface Rate: 10/100BaseTx
Duplex: half / full duplex.
Interface character: match IEEE802.3U, IEEE802.3x, IEEE802.1Q
Connector: RJ45
Optical interface:
Line mode type: CMI
Optical wavelength: 850/1310nm for multi-mode fiber, 1310/1550nm for single-mode fiber.
Optical interface: SC/FC(Optional)
Transceiver module: > -8dBm (for 1310nm single mode 40km optical module)
Optical receiver sensitivity: <-36(BER<10) (for 1310nm single mode 40km optical module)
Transmission distance: multi-mode 2 Km, single-mode 20/40 /60/ 80 / 120 Km, WDM available for different distances
Architecture:
19’’, 1U, rack mountable
Power supply:
DC: -48V (-36 to -72V);
AC: 85 to 264 VAC ; 47 ~ 63Hz
Power Interface: DC power terminal/AC socket
Power Consumption: ≤ 10 W
Other Specification
Operation temperature:0℃～50℃
Storage temperature:-20℃～80℃
0～90%(no condensation)
Typical Application:
