Modular Integrated Optical Multiplexer
(LCD & CLI & SNMP & WEB management optional)
The Modular Integrated Transmission Multiplexer can provide full speed 100Mbps fast Ethernet (FE) interface in accordant with IEEE802.3 and E1 interface complying with 16-channel standard. At the same time, it also provides sufficient network management interface function and realizes SNMP network management or device management via hyper terminal. The device itself is supplied with a LCD displayer for user to carry out configuration and management. The whole system adopts modularized structure. 16 channels of 2M services are divided into four modular slots, with four channels for each. Different interface modules can be applied based on networking requirements of different users, and different user requirements for application environment and business growth can be met through addition or replacement of interface modules. The equipment can cater to the network application of general scale.
Main Features
The modular integrated transmission optical multiplexer is created with optical path interoperability, flexible structure and modular design. Its function modules are independent of each other but easy for assembly, which enables it to derive a series of optical multiplexer products with multi-service interfaces. The equipment is furnished with four modular slots. According to the networking requirements of different users, various kinds of interface modules can be employed. Users can also add or replace interface modules to accommodate to the requirements of different application environments to protect their existing investment. Meantime, the equipment allows users to activate expandable interfaces to adjust the scale of network interfaces based on business growth, so as to help realize real-time follow up of network to business.
◆1+1 Optical Redundancy Backup: Protection of dual optical interface available to ensure that business will not be interrupted when one pair of optical fibers is confronted with failure. Supporting hot add/drop of optical interface, and fulfill switching without error code during hot add/drop.
◆ Flexible Configuration: 4/8/12/16E1 optical multiplexers and multi-service interfaces are derivable from main system board and different functional modules, to meet different user requirements and customizations.
◆ Various Functional Modules: User interface modules (N*64K V.35, FV.35, FXO/FXS, E/M, RS232/RS485, and etc.), order wire module, network management module (RS232, and Ethernet Interface, etc.), and alarm output terminal module, etc. available.
Service Interface Card
G.703 Interface Card
4 channels of G.703 interface available
DB37 Interface, to provide corresponding external interface through adapter
Fully compliant with ITU-T G.703 recommended standards
Interface Code Type: HDB3
Bit Rate: 2.048Mbit/s + 50ppm
Dual V.35 Interface Card
Two channels of V.35 interface available
Interface Electric Level: In compliance with CCITT V.35 standard
Physical Interface: DB25 Interface
Bit Rate: 2.048Mbit/s
4-Channel V.35 Interface Card
4 channels of V.35 Interface to be framed Interface
Electric Level: In Compliance with CC ITT V.35 Standard
Physical Interface: DB37
Speed of Interface: N*64Kbit/s
FXO/FXS Voice Channel Interface Card
Physical interface: RJ45
FXO interface card: to provide 4-channel or 8-channel
FXO interface connected with switch..
FXS interface card: to provide 4-channel or 8-channel FXS interface connected with ordinary telephone sets.
Supports display of incoming calls.
Supports billing function of inverted polarity.
RS232 Interface Card
Physical interface: RJ45
Four RS232 transmission channels available Transmission Speed: 110~115.2K bps Transmission Mode: Full-Duplex
RS422/RS485 Interface Card
Physical interface: RJ45 Four RS422/RS485 transmission channels available
Transmission Speed 110~115.2K bps
Transmitting Mode: full/half duplex
Network Managaement System:
Network management Unit is designed to control all settings on the control panel and to realize communications between multiplexer and computer.The unit can send commands (such as alarm-off, remote bypass loop-back and so on) to nodes through computer. Users can directly query and set the status of a pair of devices with Hypber Terminal software Via RS232 crosswire. NM-ETHinterface(10/100M auto-negotiating, to be configured) can be directly connected with a computer via a crosswire or with a HUB via a straight-through wire to fulfill management. It can realize ALS (Automatic Laser Shutdown/Automatic Laser Reduction) to prevent personnel from fiber injury. The user can select network management functions according to its actual requirements.
NMS of our device can support standard SNMP protocol, and can be compatible with NMS system of other manufacturers, and can offer WEB view, as followed pictures:
Typical Application: